Dr. Alok Khatri

Education

Employment History

Research Interests

Agile manufacturing, Ergonomics, Manufacturing systems, Non-conventional Machining, Industrial Engineering, Lean manufacturing, Supply Chain Management, Logistic Management

Master's Thesis Guided

Deepak Sharma

Mahesh Kumar Sharma (10EEAPE606)

Rahul Sharma (15EEAPE606)

Ankit Chouhan (16EEAPE600)

Ranu Bansal (16EEAPE604)

Ajay Kumar Choudhary (17EEAPE601)

Khushboo sharma (17EEAPE605)

Girdhar Gopal Khichi (09EEAPE605)

Journal Publications

Khatri, A., Garg, D. and Dangayach, G.S. (2014) ‘Agile manufacturing: a framework for achieving Agility’, Industrial Engineering Journal, Mumbai, India, Vol. 7, No. 12, pp.06–09.

Sharma, D. and Khatri, A. (2014) ‘Backward integration of supply chain management : A case study’, International Journal of emerging technology & advanced engineering, Vol. 4, Issue 5.

Sharma, M. and Khatri, A. (2015) ‘Total quality Maintenance & trouble shooting: A case study’, International Journal of emerging technology & advanced engineering, Vol. 5, issue 3.

Khatri, A., Garg, D. and Dangayach, G.S. (2016) ‘Agile manufacturing: Model and Manpower challenges’, The Institute of Engineers (India), Vol. 1, No. Annual, pp.10–17.

Sharma, D., Khatri, A. and Y. B. Mathur (2016) ‘ Application of value Stream Mapping in Bhujia Manufacturing’, International journal of mechanical engineering and technology (IJMET), Vol. 7, Issue 6, pp. 1-7.

Dangayach, G.S., Khatri, A., and Garg, D. (2017) ‘Managing Agility via Fuzzy Logic: A Case Study of machine tool industry’, Productivity - National Productivity Council of India Journal, Vol.58, No. 1, pp.64-79.

Khatri, A., Garg, D. and Dangayach, G.S. (2018) ‘Modelling of Prime Agile Enablers: People, Virtual Integration and Information Technology’, Procedia Manufacturing, 20, pp. 464-469.

Khatri, A., Garg, D. and Dangayach, G.S. (2018) ‘An empirical investigation of agility factors in select Indian manufacturing industries’, Int. J. Business Information Systems, Vol. 28, No. 1, 42-66.

Sharma, D. Khatri, A. and Mathur Y.B. (2018) ‘Application of Value Stream Mapping in Papad Manufacturing’, International Journal for Research in Applied Science & Engineering Technology (IJRASET), Vol. 6, Issue IV, pp 874- 878.

Sharma, D., Khatri, A. and Y. B. Mathur (2018) ‘ Application of value Stream Mapping in Papad Manufacturing’, International journal for Research in Applied Science & Engineering Technology (IJRASET), Vol. 6, Issue 4, pp. 1-7.

Khatri, A., Garg, D. andDangayach, G.S. (2019) ‘A comparative analysis of factor analysis model for pinpointing agile developers’, Int. J. Agile Systems and Management, Vol. 12, No. 2, pp.91-107.

Khatri, A., Garg, D. and Dangayach, G.S. (2019) ‘Critical success factors of sustainable manufacturing and procurement: An empirical study’, International Journal of social ecology and sustainable development, Spl. Issue- Bridging Sustainable procurement and organization theories, Vol. 10, Issue 3, 17-27.

Khatri Alok and Gahlot M. (2019) 'Ergonomic Customized Seat Development Process and its application', International Journal of Research and analytical Review, Vol. 6, Iss 2, pp. 769-

Khatri Alok and Gahlot M. (2019) 'Ergonomic Design of seat for different operations', International Journal of Research and analytical Review, Vol. 6, Iss 2, pp. 775-

Sharma D., Khatri A., Mathur Y.B., (2019), 'Implementation of Backward Integration of Supply Chain management in papad industry : A Case Study', journal of the Gujrat research society, Vol. 21, Issue 15, pp. 541-

Sharma K., Sambharia J.K., Khatri A., (2020), 'Optimization of process variables in plasma arc machining of Inconel-718 alloy using Taguchi with Grey relational analysis', Advances in Manufacturing Processes, pp 37-58

Conference/Workshop Publications

Khatri, A., Garg, D. and Dangayach, G.S. (2017) “Modelling of Prime Agile Enablers: People, Virtual Integration and Information Technology”, 2nd International Conference on Materials Manufacturing and Design Engineering, MIT Aurangabad, 11-12 Dec, 2017.

Khatri, A., Garg, D. and Dangayach, G.S. (2015) ‘Legible Manufacturing in Automobile Industry: A Focus’, All India Seminar of Mechanical Engineering Division Board, Institution of Engineers (India), Jaipur ‘Theme: Automobile Industry Perspectives’, August 8-9, 2015.

Khatri, A., Dangayach, G.S. and Sharma, D. (2015) ‘Value Stream Mapping: A Lean Manufacturing Tool’, All India Seminar of Mechanical Engineering Division Board, Institution of Engineers (India), Jaipur ‘Theme: Automobile Industry Perspectives’, August 8-9, 2015.

Khatri, A., Garg, D. and Dangayach, G.S. (2013) ‘Human Resource Development in Indian Agile Manufacturing Industries’, International Conference ‘Human Resource Development in South Asia: Issues, Achievements and Challenges’, Government College, Ajmer, Dec. 19-21, 2013.

Sharma, D. and Khatri, A. (2013) ‘Implementation of Contract Farming : A Case Study’, International Conference on Advance innovation in Science & Technology Management by Zenith infotech and Govt. Engineering College, Bikaner, Nov. 16, 2013

Khatri, A. and Sharma, D. (2013) ‘Contract Farming: A Supply Chain Tool’, National seminar on ‘Advancements in Productions and Operations Management’ ‘’ at The Institution of Engineers (India), Jaipur, May 04-05, 2013.

Gahlot, D., Khatri, A. and Pareek A. (2008) ‘Implementation of quality circle-A case study’, National conference on ‘Recent Advancement in Engg.& Tech-2008.’, Govt. Engineering College Ajmer, April 26, 2008.

Khatri, A., Kamal, D., Gidwani, B. D. and Gahlot, D. (2008) ‘Poka-Yoke: A Technique of Mistake Proofing’, National conference on ‘Recent Advancement in Engg.& Tech2008.’, Govt. Engineering College Ajmer, April 26, 2008.

Gahlot, D., Khatri, A. and Kamal, D. (2008) ‘Poka-Yoke: A Technique of Mistake Proofing’, National conference on ‘Recent Advancement in Engg.& Tech-2008.’, Govt. Engineering College Ajmer, April 26, 2008.

Gupta, L.M., Khatri, A., Sharma, A. and Dahiya, R.P. (2007) ‘Plasma Nitriding of surfaces of materials’, National Conference ‘Recent Trends in Mechanical Engg.’, Gyan Vihar University, Jaipur, March 17, 2007.

Khatri A, Sharma R, Gehlot D, Yadav R, (2017)'Experimental Investigation Of AFM By Using Response Surface Methodology Method And Parametric Optimization By Genetic Algorithm'4th International conference on industrial Engineering (ICIE-2017) at S.V. National Institute of Technology, Surat

Khatri A, Dhobi K, Gehlot D (2019)Experimental investigation of machining parameter in ECM on AISI 304 stainless steel', International Conference at SVNIT, Surat

Khatri et al., (2019), 'Implementation of Backward Integration of Supply Chain Management in Papad Industry: A Case Study',National Conference on “Future Dimensions in Science, Technology & Engineering (NCFDSTE-2019)"

Books Publications

A.D.Sharma, Alok Khatri, S. Singh (2007) "Engineering Thermodynamics" CBC, Jaipur

Sharma, D., Khatri, A. and Mathur Y. B. (2018) “Implementation of Contract Farming & Value Stream Mapping: A Case Study” Lambert Academic Publishing, pg 104, ISBN: 978-613-9-94112-4.

Expert Lectures/Workshops

Expert lectures taken at M.D.S. University, R.T.U. Kota, Aravali Institute udaipur, GEC Ajmer on SPSS, Material Science, Heat treatment, Product Design and development etc.

Conference/ Seminar/Short Term Training Organized

Acted as Committee Member in IEEE, 6th Indian Antenna Week at Govt. Engineering College Ajmer, 30th May – 03rd June 2015.

Acted as Committee Member in IEEE International Conference on ‘Signal propagation and computer technology (ICSPCT)-2014’ at Govt. Engineering College Ajmer, July 12- 13, 2014.

Acted as Committee Member in National seminar on ‘Recent Advances in Mathematics with Applications in Engineering’ at Govt. Engineering College Ajmer, March 12-13, 2012.

Acted as Committee Member in National seminar on ‘Recent Advancement in Engineering & Technology-2008’ at Govt. Engineering College Ajmer, 26 April 2008.

Acted as Convener & coordinator in Induction Program for B.Tech. Mechanical Students at Govt. Engineering College Ajmer, 7-21 August 2018.

Convenor, One week short term course on"Entrepreneurship and personality development"

Convenor, One week short term course "Renewable Energy System and their Techno- Economic Feasibility in India"

Convenor, Two days National workshop on Research projects, funding and opportunities in Engineering and Sciences

Convenor, One week short term course onIntroduction to Programming: A Pedagogical Approach through ICT by IIT, Kanpur

Convenor, one week Short term program on Industry 4.0 and Condition Monitoring from 15th- 19th March 2021

Workshops/FDP/Trainings Participated

Attended programme on Introduction to sustainable manufacturing at Malaviya National Institute of Technology, Jaipur during 19-23 Dec. 2016.

Attended programme on Recent Trends and Technology in Information, Communication and Computing at Govt. Engineering College Ajmer during 23rd Feb to 3rd Mar. 2016.

Attended Recent Advancements in Automotive Technology through ICT at Govt. Engineering College Ajmer during10-14 Aug.2015

Attended programme on Advances in digital system design at Govt. Women Engineering College, Ajmer during 26 Nov – 5 Dec 2015.

Attended one week Faculty Development Programme on Curriculum Development and Execution organized by Govt. College Ajmer during 27-31 Jan. 2014

Attended one week programme on Advanced Research Methodology at Motilal Nehru National Institute of Technology Allahabad during 14-20 July 2014.

Attended Induction Training programme through ICT organized by NITTTR, Chandigarh at Govt. Engineering College Ajmer during 11-15 Feb. 2013.

Attended Faculty Development Programme organized by Rajasthan Consultancy Organization Ltd., Jaipur at Ajmer during 01-13 Feb. 2011.

Attended programme on Advance course on sustainability in materials & Design at Malaviya National Institute of Technology, Jaipur during 21st May to 1st June 2018.

Attended programme on Introduction to sustainable manufacturing at Malaviya National Institute of Technology, Jaipur during 19-23 Dec. 2016.

Attended programme on Recent Trends and Technology in Information, Communication and Computing at Govt. Engineering College Ajmer during 23rd Feb to 3rd Mar. 2016.

Attended Recent Advancements in Automotive Technology through ICT at Govt. Engineering College Ajmer during10-14 Aug.2015.

Attended programme on Advances in digital system design at Govt. Women Engineering College, Ajmer during 26 Nov – 5 Dec 2015.

Attended one week Faculty Development Programme on Curriculum Development and Execution organized by Govt. College Ajmer during 27-31 Jan. 2014.

Attended one week programme on Advanced Research Methodology at Motilal Nehru National Institute of Technology Allahabad during 14-20 July 2014.

Attended Induction Training programme through ICT organized by NITTTR, Chandigarh at Govt. Engineering College Ajmer during 11-15 Feb. 2013.

Attended Faculty Development Programme organized by Rajasthan Consultancy Organization Ltd., Jaipur at Ajmer during 01-13 Feb. 2011.

Attended programme on Advance course on sustainability in materials and design at Malaviya National Institute of Technology, Jaipur during 21st May to 1st June 2018.

National workshop on ‘Earthquake dynamics and design of RC buildings’ Govt. College Ajmer, Feb 25-26, 2017.

Administrative Responsibilities

Other Informations

Sponsorships 1. Convener, Livelihood Business Incubator, MSME project, 79 Lacs, Commencement from March 2019. 2. CO-PI, CRS Project, 16.15 Lacs, Commencement from June 2019 ended June 2021, Completed.

Consultancy Project 1. Convener Feasibility study of Rajasthan Sadak Suraksha Society for establishment of Regional driving training Centre at Singawal, Ajmer, Rajasthan, Rajasthan Sadak Suraksha Society, Ajmer 15000.00, March to August 2019, Completed.